Grain Mill Grinder 750g High Speed Electric Stainless Steel Grinder Cereals Corn Flour Pulverizer Powder Machine for Dry Spice Herbs Grains Coffee Rice Pepper(750g Stand Type). MIXER GRINDER : Power:2000W ; Capacity:750g; Interval Time:5-10 min;Rotating Speed: 25000R/Min, Triples blade: grinding blade, rotary blade, and powder removal blade, can be pulverized easily. Crushing fineness reaches from 50 to 300 mesh no more than a minute. Metal motor blade: wear resistance good. Dry raw materials only. Wet, moisture or oil materials can’t be ground. MULTIPURPOSE GRINDER MILL – Widely used for grinding grains (soy, corn, barley, rice, wheat, mung beans, coffee beans), spices (star anise, fennel, pepper, rosemary), herbs, sesame, peanuts, walnuts. It is applied to milling work of dried food such as herbal medicine, Please make sure the materials you gonna to grind cover the long blade and no more than 2/3 of the jar. SUPER SAFE:Electric herb grinder made of food-grade stainless steel, sturdy and durable. The spice grinder electric will automatically turn off the power when overloaded, to protect your safety, gently press red button reset, you can continue to use it normally. Recommend use time is no more than 3 minutes. Do not continuously operate the machine, and it takes 5-10 minutes to rest after every 3 minutes of grinding work. SCOPE OF USE :Grinding mill It is widely used in families, kitchens, restaurants, clinic, hospital, pharmacy, institute laboratories, medicine processing factory, food store and powder processing, valet processing of health care products crushing sales counters, instead of traditional grinders. CLEANING AND STORAGE:1. After each grinding, use a moist paper towel or cloth to clean up the food powder, not directly rinse with water, which will damage the motor;2. After cleaning, please put it in a ventilated place, so that the inner compartment to keep dry, do not put in the sun, check the dry and then cover the lid and store. This grain grinder can only be turned on after the lid is fully buckled. The materials ready for grinding must be dry enough. Rest the machine for 5-10 minutes after every 3 minutes operation. Do not put the material over 2/3 of grinding bin. Don’t clean the grinding tank with the water directly. Keep water away the grinding tank and use dried rag or brush to clean the machine. Tips : Due to brush motor, if they both spark and light up in the motor area and fumes arise is normal, which will disappear after you use the machine some times later. When the first several uses there may be a smell, you can Grind some Rice or Dried Tea first for several times to eliminate the odor. USE SAFE : Our machine has UL certification, FCC certification, CE certification, The machine has overload protection and will automatically disconnect the power, please feel free to use, for more considerations and questions, please refer to the instruction manual. We endeavor to make our customers happy, and would appreciate the opportunity to rectify any issues that may occur. IMPORTANT ATTENTIONS – 1. The materials ready for grinding must be dry. Recommend grinding capacity one time:the material you gonna to grind one time must cover the long blade in the middle and no more than 2/3 of the tank. Recommend use time: no more than 3 minutes. It takes 5-10 minutes to rest after every 3 minutes of work. Please do not turn on the machine when the top cover is open. Please change the barbon brush and blade afer long time use. Please check the screws of the blade. Any product you return must be in the same condition you received it and in the original packaging. Please keep the receipt. We usually respond within 24 hours on weekdays. Thank you for shopping at our store.
