Please rest assured that our products and services are guaranteed. What should I do if the machine smokes? If the machine is smoking, it could be one of these 2 things. One is that the machine has been used for too long and has been grinding, the motor will have resistance and the carbon brushes will be bad. Solution: Replace the carbon brushes, which have been given in the accessories. Secondly, something has jammed the blade. Solution: Remove the thing stuck blade, then replace the carbon brush, the machine does not add something to run under the power will be fine. How to do when the machine is working with sparks? Our grinding machine is through the carbon brush contact conductive work, the machine will just start a little spark, as long as the spark is not very large can be used normally. What if there is a smell when the machine is in use? As the carbon brushes are made of resin, it is normal for them to have a slight smell. What if the powder flies out when the machine is in use? It is possible that the cap is not tightly closed. Solution: Please make sure that the seal is fitted properly in the recess between the housing and the liner. If the seal is installed correctly, please note when using the machine: 1. Press down a little when closing the lid. Turn the nut of the lid upwards to the snap and make sure it is tight. Natural rubber material, high wear resistance, four-point stability setting, no sliding on any material desktop. 3 layers of blades, high speed grinding, time saving, super fine powder. Open Lid Sstop Design. When the lid is opened, the machine will automatically stop, making the operation safer and more ergonomic. The grinder is suitable for dispensary, medicine processing factory, powder processing, beauty salon, lab and so on. The indicator light is on but the machine is not working? One is to replace the carbon brushes. You will be given extra brushes in the kit. Secondly, make sure that the timer is not set properly. Is it normal for the machine to heat up when working? Yes, it is normal, the machine is powerful, the speed is fast and the things in the machine collide with each other when the lid is sealed to generate heat. How long is the right time setting for the machine to be used? If you are grinding oily and sugary things, the grinding time should be shorter, usually 10-20 seconds. If it’s dry cereals, a minute or so is fine. Please note that the machine cannot grind wet things, only dry things. How do I adjust the coarseness of the ground powder? This is adjusted by the time setting, the shorter the time the coarser the powder, the longer the time the finer the powder. The drier the solids are, the finer the powder will be, but the effect of grinding fibrous, soft and oily things like Chinese medicine will be relatively poorer than dry things. What does the protector do? The protector protects the machine automatically when the current is too high. After the power has been tripped, you need to press the protector before the motor is re-energised. Stainless steel copper motor, tough and durable. The buckle structure, good sealing, high security. Beautifully-designed, easy to use and portable. The crushed goods should not exceed two-thirds of the crushing bins. Can not be used continuously for a long time, each time can not exceed 10 minutes. Do not wash the crushing bin with water. Long-term use of blades is severely worn and needs to be replaced regularly. Please check if the blade is loose before use. 1 X Spare Blade. 1 X Carbon Brush. 1 X Socket Wrench. This item is in the category “Home & Garden\Kitchen, Dining & Bar\Small Kitchen Appliances\Grain Mills”. The seller is “best-hottoby” and is located in this country: US. This item can be shipped to United States.
- size: Volume:1000g
- Brand: Hottoby
- Type: Grain Mill
- Power Source: Electric
- Manufacturer Warranty: 1 Year
- Color: Silver
- Voltage: 110 V
- Model: KitchenAid KGM
- Material: Stainless Steel
- MPN: 12
- Food Compatibility: Grains
- Components Included: Base, Grinder
- Power: 2500 W